Regardless of whether you are a student, housewife, or DIY pro, as soon as you move into your own home, there are some staple items that you should always keep for those ‘just in case moments’, batteries, a hammer, measuring tape, light bulbs, etc. At some point, you will need them and it’s a nuisance when you don’t have them. Wood glue is an absolute must to have on this list!
Wood glue can be used for a huge array of projects and tasks. You can use it to repair furniture, cutting boards, ornaments, the kid’s school projects, models, just to give you an idea. If you are new to wood glue, you might assume that they are all pretty much the same. This article is going to explain the differences between the Titebond 2 vs 3. While they are both wood glue, there are some features that will suit your needs better than others.
You will find that the Titebond Franklin international 5005 II and the Titebond 1416 III Ultimate come in a range of buying options, we are going to focus on the 1-gallon bottles, and we will start by how the two are similar.
You can use the Titebond Franklin international 5005 II and the Titebond 1416 III Ultimate wood glue for anything made of wood. The Titebond Franklin international 5005 II is advertised for external use and the Titebond 1416 III Ultimate is advertised for internal and external use, but we have tried both indoor and outdoor and they work in the same way. Both the Titebond Franklin international 5005 II and the Titebond 1416 III Ultimate are FDA approved for indirect contact with food, so you can use them for cutting boards and wooden utensils.
After Using the Wood Glues
Once the glue has dried, you notice that the Titebond Franklin international 5005 II and the Titebond 1416 III Ultimate have excellent standability. So, I won’t have to make a great effort to leave a smooth finish. Cleanup is easy and the excess glue can be wiped away with a cloth and water. Neither of these Titebond glues is affected by finishes.
Viscosity refers to a fluid’s resistance to flow, or basically, its thickness. Fluids with high viscosity are thicker than those with a low viscosity. It is measured in cps and normally at 75ºF. Glue viscosity can range from 200 cps to over 1 million cps. The Titebond Franklin international 5005 II and the Titebond 1416 III Ultimate have a viscosity of 4,000 cps, good for getting in gaps but not too runny that you make a mess.
It’s unlikely that you will use the entire pot of wood glue in one go. The Titebond Franklin international 5005 II and the Titebond 1416 III Ultimate will last for up to 24 months when the lid is tightly closed and stored in a temperature of around 75ºF.
Now let’s take a look at how the two wood types of glue from Titebond differ.
Type of Wood Glue
For most of us, we just want to know that the glue is going to effectively stick things (which both do!). Others might want to know the actual type of wood glue.
This is a cross-linking polyvinyl acetate.
This is an advanced proprietary polymer.
The Winner Is- A Tie
Previously, is you wanted a water-resistant wood glue, you would need to use a two-part wood glue (a resin and a hardener that you would mix together). Both of these Titebond wood glues are one-part and water-resistant.
You can enjoy superior water-resistance. It was the first one-part glue to pass the ANSI Type II water-resistance test.
It is ANSI and HPVA Type I water-resistant.
The Winner Is- The Titebond 1416 III Ultimate
The assembly time is what some would call the drying time. It’s the length of time it takes from the moment it is applied to the moment it can no longer be manipulated.
The assembly time is approximately 10 to 15 minutes at 70ºF.
The assembly time is quite a bit longer, between 20 at 24 minutes at 70ºF.
The Winner Is- The Titebond Franklin International 5005 II
Pros and Cons